How to Hook a Bowling Ball
The bowling ball is by far and quite obviously the crux of the game of bowling. This is the one reason why there is so much equipment needed for this game. Maintenance is a top priority for bowling balls and for this the right equipment is required. If the ball is not able to achieve any friction on the lane, it is definitely not going to hook. This means you need to pay special attention to the ball. If you want the bowling ball to hook well you need a ball that has been made out of Reactive Resin cover-stock. Other balls do not give much of a hook especially the ones that are made of polyester or plastic cover-stock. In most bowling centres, polyester cover-stock balls are used that do not have much hook as these balls are best suited as spare balls and most spare balls only travel straight.
To get the best hook in a ball it needs to be drilled properly, precisely and correctly. This is the most important factor in having the ball hook properly. Make sure you get the best advice from a local store as to how to drill a ball or get it done by a trained experienced technician for bowling equipment. Drilling is required so that the ball fits your hand well and provides you with a perfect grip. Drilling is based on the conditions of the ten pin bowling ball and it also will affect the ball’s performance on the lane. Not to mention a well drilled ball gives a good hook.
Using a proper grip is also another important factor of having a good hook. The ball needs to be gripped in the most suitable way or the way you find most suitable to grip it and score a perfect game in case you are a professional bowler. There are 2 kinds of grips - The conventional grip and the Vacu-Grip. The conventional grip is where the middle finger and the ring finger are inserted up to the 1st knuckle. The grips that you use on your fingers will give you revs which are more than the conventional grips. This various kinds of grips will help you better the hook of the ball. Vacu-Grips grips can expand and will be suited and fit according to your finger tips. They too can help you better your hook.
It should be understood that when you are going to release the ball, it’s best not to exert a swing out off the ball. Trust your ball and you will know how to roll it to the optimum speed. Don’t forcefully push it down the lane. The hook will be a failure if not a big disaster. When you are releasing the ball, hold it towards your ankle. When you hook a ball, it is all about the leverage. If the ball is closer to your ankle while releasing the ball, your fingers will be underneath the ball hence maintaining your grip till the ball is released and not just halfway into your swing. When your hand is able to rotate over the ball, it will cause some friction where your fingers will be able to grab the hole and you will feel a force that is upward. This will cause revolutions and spins. If your ball is moving at a fast speed, it will generally be harder for the ball to get to a dry area on the lane, which will give a smaller hook than desired or no hook at all. If your ball is moving at a slower speed it will definitely be able to get a hook and the ball will hit the pins hard.
Hooks that are big will give more power to the ball while knocking those pins down. If the hook is too big, a beginner might find it quite difficult to control the river. However, if you are an intermediate bowler, it will be okay to play this ball. A lot of practice is required to develop a hook. You will have to judge the lane, adjust the ball well and be determined to get it right no matter how many times you go wrong. The best way to learn about hooks is to watch how an experienced player plays his hooks. You could also use a few tutorial books or watch a few videos on the internet on how to use a ball and learn techniques of a bowling ball.
Always remember that you are always prone to injuries especially while playing hooks. There is a big chance of spraining your hand while you are looking for a swing. You could also have quite a few wrist injuries if you do not play your ball right. So the swing mechanics need to be efficient. Use a sports manual to find out how to use a ball. Learn the correct techniques to be spot on with a hook.
A Reactive Resin ball will be best for a moderate hook and it will be a good start as a bowler. If you learn the hook with your ball, you could probably use a ball that is more aggressive later on. Use a towel to wipe off the oil from the ball especially with a resin ball as it absorbs oil really fast. Cleaning is required so that the hook is maintained. The hook might be difficult to achieve once the ball has wears out. This means that it’s time to open up the ball and clean it. You should also learn about lane conditions. Know what lane you are bowling on. The lane condition and the ball that you use together will give you the perfect hook.
If you are a beginner, it is best to throw the ball at a slower pace, because balls at a fast pace will give a strong hook which you as beginner might not be able to control. It is best that you find a speed that you are fine with and one that doesn’t hinder your balance. Hopefully this info should help with your question on how to hook a bowling ball.