Why Use a Bowling Ball Spinner
A bowling ball spinner is used to clean, sand and polish bowling balls. It comprises of a motor on which the spinner runs and a receptacle required to hold the bowling ball in place.
Basically, the cleaning of a bowling ball involves getting rid of all the oil, dirt and dust that might have accumulated over the ball’s surface. Largely, the bowlers prefer to use the portable bowling ball spinners which make it conducive for the bowlers to clean the balls.
To sand or polish a ball basically means fine tuning the roughness or the smoothness of the ball’s surface. This adjustment is done according to the requirements. Rough balls are more suited to slide easily over the oily lanes, whereas the smooth balls slide easily on the dry ones. A bowling ball spinner provides versatility to the ball in that they can be adjusted as per the lane requirements.
A single bowling ball spinner can sand, polish and clean. It is just a matter of changing its pads viz. sandpaper pads, “Scotch Brite pads”, etc.
Over a period of time, the balls on being constantly used, start to become dented, their surfaces, texture and finish get scratched and worn out. Generally, grooves start appearing on the balls representing the path the ball traversed frequently. Constant usage of ball without any polishing or cleaning will alleviate the balls performance. The scratches tend to provide a lot of friction thus, affecting the ball’s movements. Due to all these negative factors, the balls losses its ability to strike with the required impact and performs much below your expectations. Professional bowlers know how important the ball and lane interaction is to the game, because this can make or break one’s chances of winning. The surface of the ball and the lane conditions can well determine your strike rate, thereby affecting the game’s outcome and thereby your league standings. This is why a ball spinner is so important and vital to your game.
Owning a bowling ball spinner of your own sure gives you an edge, since, you can adjust your ball to suit the present lane conditions impromptu.
The bowling ball spinner sands the bowl, thereby, grinding away all the scratches and the grooves that might have developed, leaving your ball seeming as good as new. The spinner provides various types of grits that can be used to adjust the surface friction of the ball as per requirements. Using grit, the friction on the ball’s surface can be altered depending on the lane conditions. Also, when the balls are used on oily lanes, the oil slowly starts to collect on the ball’s surface and gradually start to seep in giving your ten pin bowling ball, a shiny oily appearance. They prove useful in such circumstances and helps in extracting the oil off the ball.
It is very important that ball adapts to the current lane conditions so that you are able to bowl your best. The friction and the smoothness of the ball’s surface need to be constantly altered as per the conditions. Use the ball spinner accordingly.
Before you use a spinner, you need to read through the guidelines and instructions very carefully because if you are clueless about how to use it, it could prove you costly. You might end up over grinding or over polishing, thus, ruining the ball beyond repair. So it is advisable to use it, initially, under the guidance a professional, until you get the hang of the spinner.
Let us discuss following important points concerned with a bowling ball spinner –
- Polishing – Polishing the ball, helps your ball become smooth and enhances its rolling ability, especially in dry conditions. When the ball surface is smooth, it can roll down the lane with much ease, thereby, conserving a lot of energy. But, if the ball is dull and not smooth enough, then it requires more energy for rolling, which could much rather be used on reaching the backend. Thus, polishing a ball, boosts its performance.
- Sanding – Sanding a ball helps get rid of scratches and dirt that might have accumulated on the ball’s surface. Scratches hinder and obstruct a ball’s hooking potential. So, it is very necessary to sand the ball well and aptly. However, one should use a lower grit sand paper followed by the higher grit sand paper before you take to polishing. A beginner or an amateur should avoid sanding a ball without any guidance, because if done erroneously, it could alter one’s performance.
- Resurfacing – It is very necessary to resurface the ball occasionally or whenever any sort of a groove or indentation starts to develop. A bowling ball spinner aids in re-surfacing a ball by polishing, sanding and getting rid off dirt and dust collected on a ball’s surface.
Also, it is important to pick and purchase a good quality spinner. A good ball spinner should be able to sand, polish, grind and clean the ball very well. This is very important point to be taken into consideration since this can affect your overall performance.
A bowling ball spinner can cost you any where between $300 and $2000. Make sure the quality of the merchandise you are bound to purchase is of high quality. Of course they should be affordable and well within your budget. There are lots of good ones available at affordable prices.
A good ball undoubtedly helps you improve your performance ten fold. But you must keep the ball in good shape throughout and this is possible using a bowling ball spinner. This way, not only will your performance be boosted, but also the ball lasts much longer.